Hangzhou Aotuo Mechanical And Electrical Co., Ltd. 86- 571-88308146 info@hzaotuo.com
600T/H Tire Mobile Screw Ship Unloader 15000 DWT Unload Large Sea Ships

600T/H Tire Mobile Screw Ship Unloader 15000 DWT Unload Large Sea Ships

  • High Light

    600T/H Tire Mobile Screw Ship Unloader


    flexible Tire Mobile Screw Ship Unloader


    Tire Mobile Screw Ship Unloader 15000 DWT

  • Place of Origin
    Hangzhou of China
  • Brand Name

600T/H Tire Mobile Screw Ship Unloader 15000 DWT Unload Large Sea Ships



Capacity 100 ~ 500t/H (Calculated According To Cement Bulk Density)
Applicable Ship Type 600~15000 DWT
Horizontal Swivel Angle Of Horizontal Arm ±135°
Pitch Angle Of Horizontal Arm 30° For Lifting Up And 30° For Probing Down
Swing Angle Of Vertical Arm 30° For Inner Swing And 40° For Outer Swing
Energy Consumption ≤0.8kwh/T
Noise ≤ 80dB
Dust Emission Concentration ≤ 10 Mg/M³




The ATXL-T tire mobile screw ship unloader is used in seaport wharfs that do not have installation tracks or fixed bases, and can unload large sea ships. The way of tire movement makes the equipment move more freely and the unloading operation is more flexible.


1. Wear-resistant: Powdery dry bulk materials are different from other types of materials. Due to the characteristics of high-speed screw conveying, the spiral blades and the wall of the spiral pipe are almost not worn, and only a few of the intermediate connecting shafts and their accessories of the screw conveyor are Components have wear resistance requirements. ATXL type screw ship unloader intermediate shaft and its accessories are made of high wear-resistant alloy materials with a number of patented technologies, and inlaid with carbide particles, with a service life of over 1 million tons.

2. Efficient: High-efficiency special reclaiming device and high-speed screw are used to continuously lift and convey materials. The height of the remaining material in the cabin is ≤250mm, the maximum unloading capacity is 1500 tons/hour, and the average operating efficiency is more than 70%.

3. Energy saving: Due to the continuity of material conveying of the screw ship unloader, it is easy to realize the whole process of closed-loop control and automatic adjustment from the reclaiming end to the discharging end, so that the ship unloader is always in the best working condition. Minimize the loss of reactive energy, so that the unit energy consumption is between 0.5-0.7KWH/h, reaching the level of energy saving.

4. Environmental protection: The screw ship unloader has a completely closed conveying system. During the operation, there will be no material leakage, and the impact of dust is strictly controlled to a minimum, which can meet the port industry and national emission standards. In addition, a reclaiming dust suppression device can be selected to minimize the dust flying during the reclaiming process.

600T/H Tire Mobile Screw Ship Unloader 15000 DWT Unload Large Sea Ships 0