|Capacity||300~1500t/h (calculated by clinker bulk weight)|
|Applicable Ship Type||500~100000 DWT|
|Horizontal arm horizontal rotation angle||±135°|
|Horizontal arm pitch angle||30° upward lift, 30° downward probe|
|Vertical arm swing angle||inner swing 30°, external swing 40°|
|Dust Emission Concentration||≤ 10 Mg/M³|
ATSL type environmental protection clinker screw ship unloader is a major technological innovation in the research and development of clinker unloading equipment, its design of super wear-resistant screw reclaimer with dust suppression and dust suction device makes clinker unloading operation meet the needs of environmental protection and efficiency, solve the problem of dust flying and inefficient operation when unloading, meet the national environmental protection standards, and is an upgraded alternative equipment for clinker operation in port and terminal to replace grabs. At present, in the clinker transfer equipment market, this clinker ship unloader technology is more mature, the process is more exquisite, and it is more popular with customers!
1. Super wear-resistant:
ATSL clinker ship unloader is the result of AOTUO's 19 years of technical accumulation and ingenuity, with reasonable structure, scientific and efficient, and is the first in the world. The surface of the blade of the screw machine at the intake port adopts proprietary process technology to integrate the "diamond grade" wear resistance, which can exceed the wear resistance life of 3000H. This type of equipment can also receive and unload sand and gravel with a particle size of ≤ 100mm.
The subsequent lifting and conveying adopts a special wave flange belt machine, which adopts imported super hard wear-resistant materials and is made by special technology, and its transportation life can exceed 3 years.
2. Environmental protection:
The screw reclaimer has a built-in dust suction and dust suppression system, which can quickly collect and absorb dust caused by material flow and material layer collapse during the reclaiming process. The interior of the belt conveyor for subsequent lifting and conveying is fully sealed, and a bag-type dust collection port is provided at the tail of the belt conveyor, which maintains a slight negative pressure in the sealing channel to solve environmental protection problems such as dust flying, and completely solves the problems of spreading, leakage, ash, dust and other problems in the open operation of grab unloader, which is the most ideal replacement product for traditional grab ship unloader.
3. Energy saving:
The environmentally friendly clinker ship unloader adopts a permanent magnet motor as the drive, and at the same time controls the total length of the reclaim screw machine < 5m, which is smaller in size and greatly saves energy consumption. The subsequent lifting conveyor adopts a wave flange belt conveyor, which greatly reduces the energy consumption of the whole machine, and the energy consumption of the whole machine is about 0.6~0.8KWH/t.
Installation method: fixed type, track mobile type, tire mobile type, ship-mounted type