Screw Coal Unloader C with Capacity 800t/h
1. Environmental protection: no dust escapes during the whole process of coal unloading; High efficiency-high yield, 400 ~ 1500 t/h;
2. Long service life: high wear-resistant materials are used for the feeder and spiral blade of the coal unloader and the conveying pipe.
3. Wide adaptability: it can be applied to 800～50000 DWT bulk coal carriers to unload lump coal with water content of 20% and particle size of 200mm;
4. Low energy consumption: the energy consumption per ton is about 1 degree, which has obvious advantages of energy saving and environmental protection compared with grab coal unloader.
This product is developed by AOTUO in response to the current mandatory requirements of energy conservation and environmental protection for coal unloading in ports. It is a special equipment for coal unloading with good development prospects.
Capacity: 400 ~ 1500t/h (calculated according to cement bulk density)
Applicable ship type: 800~50000 DWT
Horizontal swivel angle of horizontal arm: ±135°
Pitch angle of horizontal arm: 30° for lifting up and 30° for probing down
Swing angle of vertical arm: 30° for inner swing and 40° for outer swing
Energy consumption: ≤1kwh/t
Noise: ≤ 80dB
Dust emission concentration: ≤ 10 mg/m³